High Acoustic Performance

High acoustic performance is achievable thanks to acoustic panels and their insulating core material called

Rockwool.

As the density of rockwool is at a higher level so also it’s acoustic performance  will improve dramatically.

While in the market it is customary to use acoustic panels in which the density of rockwool ranges is from 80 to 95,

we produce our acoustic panels with in rockwool at a density of 110 or 120!

This, of course, has an impact on the quality of our panels and their ability to deal with particularly noisy locations

and provide an effective solution for isolating space noise.

It is highly recommended that you examine the quality of our Acoustic panels and check our prices for Acoustic wall

panels and ceiling panels before you make an order in another place.

We believe we have a winning product at a funny price!

Definitely to consult with us before you buy Acoustic panels elsewhere.

[email protected]

+905427196712

Furniture for restaurant and coffee

Furniture for a restaurant must also be very esthetic and very comfortable for a long sitting, but along with all this furniture for the restaurant must be acoustic and this can be achieved by a high quality fabric that has an acoustic feature to swallow the voice.

We manufacture sofas and chairs for cafes and restaurants, which are innovative and padded with a cloth that is easy to clean and resistant to detergents and liquids so that if the coffee poured on the chair it will be easy to wear it without fearing the product life.

At the same time, we place great emphasis on the influence of the furniture on the acoustics in the building by using a very thick upholstery and fabric with acoustic quality. A combination of quality wood and furniture also helps improve acoustics.

Contact us: www.seatupturkey.net     +905427196712

Please view our latest coffee shop project for Gloria Cafe in Bursa:

cafe furniture by seatupturkey

cafe furniture2 by seatupturkey

cafe furniture3 by seatupturkey

The end to echoing rooms

Noise between the walls is especially noticeable in echoing rooms, rooms where there is a pronounced repetition of sound waves after they hit the objects in the room.

The result is not only a sound transition through the walls but also a reverberation within the room itself.

The sounds in the room are less sharp and clear. The solution is also to install acoustic insulation in the walls.

This is the solution to stop the passage of voices from the room out and also to improve acoustics inside the room.

If, for example, you want to turn a room in your home into a recording studio where the voices have to go through the room in a sharp and clear way, then only the acoustic insulation materials in the walls will provide you with the solution.

So what are those acoustic isolating materials?

The insulation material for the walls comes in the form of panels or sheets that can be glued to the wall. Our materials are based on Rockwool and coated with acoustic fabric or can come in various compounds of polyurethane injection, and the sheets are easily attached to the walls.

There are also unique 3D Acoustic panels made of Rockwool or polyurethane injection for both decoration and Acoustic performance and they can be glued to the walls easily.

The size and thickness of those panels comes in a variety of different sizes and thickness depending on your project demend.

As well the density of the core materials is an issue which can be deal according your project needs, as much as the density of the core material is higher that much the acoustic performance will be improved to his best.

Different absorption are needed according the different noises when each type of noise has an ideal solution and the right acoustic panel which can deal with it.

Don’t think that there is only 1 type of panel that can solve for you everything.
Consult our experts to find the best material for you.

Another solution is the construction of drywall while installing an acoustic insulation material between the plaster wall and the wall of the room. The double wall with the insulating material installed in the vacuum provides an excellent solution and absorbs the noise well.

Acoustic insulation for walls in public buildings

So how do you do it? What are the materials that make magic and absorb and suppress the noise?

Do you have to dismantle the whole wall to install them?

So first of all relax and get calm! the solution does not of course require dismantling the wall!

When it comes to public buildings the options for insulation of the walls are many more.

Different insulation materials can be used and the design options are varied,

unlike a private house where we want to keep the appearance of walls as close as possible to the standard.

In addition to plasterboard tiles, decorative acoustic panels, perforated wood panels and other materials can be used to absorb the insulation.

Acoustics for walls

The acoustic solution for your wall is just ACOUSTIMA® 

Stretch ceilings are reflective and ingenious designs!

They can actually change the atmosphere in the environment in which they are installed.
In buildings with low ceilings the stretched ceiling creates the illusion that the ceiling is 7 times higher than it really is and it gives a feeling of a larger surface area in space.
This is actually also a way to truly impress the customers in your survivability of your home guests and viewers at your cinema. It is important to note that it is possible to control the lighting and extinguishing of the horizontal ceiling on the remote control or switch when and how you wish.
All in all it is a simple and inexpensive product that we create and send to you in the warranty box and if you need an installation we will be happy to send our team to help.

So your Stretch ceilings is waiting for you just give us a call

wwww.acoustima.com

+905427196712

Acoustima® 3D Acoustic panels series new model The Acoustima Triangle®

Welcome please the new member in the Acoustima® 3D Acoustic panels series … The Acoustima Triangle®
The Triangle® acoustic panel is comes in a flat  and simple form or as  three-dimensional form.
This shape allows for a very special design variation that corresponds to any space and sector between private or public. It is an acoustic panel that is exceptionally suited to cinemas, theater houses, conference halls, schools and kindergartens, and of course offices and homes.

high acoustic performance is promised according to our acoustic report.

Acoustima® 3D Acoustic panels series new model The Acoustima Triangle®

The Acoustima Triangle®2

The Acoustima Triangle®3

The Acoustima Triangle®4

Acoustics Over time we lost the ability to listen

For thousands of years, human hearing has been developed in accordance with an external environment, free of unnatural sound and independent of acoustics. Evolution has kept us away from nature and sounds like flowing streams and bird chirping have been replaced by unnatural sound returns, for example machines and devices; Such as air conditioning, printers and telephones.

This unnatural sound environment not only interferes with our hearing and communication, it also affects our well-being and performance. Acoustics or lack of acoustics is the main factor.

Today, almost 90% of our time we spend at home, at the office or traveling to our workplace. Think about it – how many hours do you spend at home on a normal day? How do you perceive the acoustical environment in its external place compared to the office?

In order to improve the indoor acoustic environment we must aspire to resemble the natural external acoustic environment by using the Acoustima® company panels!

Listen to the lecture from the TED conference on the short 10 minutes video below,

A must for every architect and designer to see:

Julian Treasure: Why architects need to use their ears

Now we offer you 50% discount on our 3D Acoustic panels to those who will offer us new shapes for 3D panels. Your drawing should be sent to our email address [email protected] and we will get back each one of you in 24 hours with answers and we will also announce in this forum about the winners of the competition.

The winners of the competition will get 50% discount on our 3D panels!!!

So are you going to suprise us with your new innovative design ideas? This campaign starts today and runs until 10.3.2018

And for the meantime watch our Acoustima spin® panel!

The Acoustima spin® panel is now available at a low price in a size of 60×60 per each panel… The ultimate solution for those looking to get high acoustics performance together with an impressive aesthetic look and innovative design,
The installation is very simple, use wall glue and just paste it.
The main use of the panel is mainly in cinemas, but many also choose to use it in auditorium and conference rooms in the public and private sectors.
A new idea that came up is actually why not use the panel in preparing partitions between office desks.
Or it is also possible to create acoustic sitting pods areas using this panel or other panels from our three-dimensional acoustic panel series .

Acoustima spin® panel photo2

Acoustima spin® panel photo

Today we are going to talk about what is better Auditorium seat with a wooden seatback? Auditorium seat with a plastic seatback? Or simply an auditorium seat with full upholstery seatback?

The people who prefer the back of the seat with some cover will say that it is better not to get dirty and not hurt, especially in cinemas and in the halls where young students or teenagers use to leaning in rows to kick or put the shoes against the back of the seat which causes not to see dirty and may even damage the upholstery himself.

And certainly more so in stadiums or gymnasiums and sport courts, Some of the audience have a tendency to kick or climb on the back of the seat, and in such a situation your seats must to have a particularly hard plastic back otherwise they won’t keep long.

Well what would be cheaper price with padded upholstery back or polyproplane (plastic) back ?

The truth is that there should not be a big difference in price between a plastic back and an upholstered back,

But the big difference in price comes when you want the back of the seat to be made of wood cover, and certainly a 18mm or 20mm polywood shield.

Those who prefer the back to be wooden usually want it for the prestigious design which it gives to the appearance of the auditorium hall, and of course also because they are concerned about the back of the seat that may be damaged when the audience rubs or kicks it with their shoes. Keep in mind that all of our chair and auditorium models are always upholstered with fabric or artificial leather which is easy to clean and very durable for water and detergents. So it’s more important that you make your decision by the design which you prefer and not because that you are worried from the durability of the fabric / leather .

Another solution that can be applied which is preferred in most cases is wooden or plastic shield at the bottom of the seatback. In such a situation, you also take care of the back of the seat and keep it from kicking  legs of those sitting in rows and you still get the appearance of a padded back.

Ultimately, the decision must be made both for design reasons and for maintaining cleanliness and visibility of the seat, and ultimately the decision is also subject to the amount of the project budget.
In conclusion, a solution for those who are afraid for the life of the seats but do not have the money for a full wooden back, is to use a plastic back cover or half plastic cover at the bottom of the seatback which will prevent friction in the area of the shoes of the audience.

We are here for you! please consult with us before you decide to buy any seats for Auditorium, cinema , multipurpose hall or stadium .

Acoustic wooden panels:

Perforated acoustic panels provide a modern, light and luxurious look and enable cladding that enables high acoustic efficiency due to their structural features. Large plate finishing options according to project requirements. All the our acoustic panels are manufactured from quality raw materials, refractories according to the EN strictest standards.

In order to achieve good acoustic results in the spaces of the room with an impressive aesthetic combination the perforated acoustic panels are made of MDF plates with thickness of 3 options: 8mm,12mm,18mm (including a 0.2 mm thick black acoustic fabric in the behind), and are technically efficient in absorbing noise.

At the design level, the cladding panels provide a fine linear, qualitative and discrete aesthetic.

Suitable for halls with high acoustic requirements such as: Auditoriums, conference halls, Library and all other kind of public buildings.

Applications area:  Wall and ceilings

Dimensions: for Ceiling: 600 x 600 mm – for Wall: 600 x 1200 mm or according to demend.

Panel thickness: 3 options: 8mm,12mm,18mm (including a 0.2 mm thick black acoustic fabric in the behind)

Materials: MDF 18 mm thick MDF base boards, possible finish in melamine or veneer for those who have the budget to invest in venner which is almost double price from the price of melamine finish.

How do I decide what is the right model for me from all the options ?

There are really a lot of our models of acoustic wooden panels, but what you need to do is first of all get a professional demand from an acoustic engineer that tells you that he is interested in some sort of acoustics and therefore you can choose a model that meets the requirements. Note that some of our models have a technical graph that indicates the acoustic quality of the panel to which it belongs, it is likely that your selection should be based on the appropriate graph.

Acoustima model 101 wooden panel

Acoustima101 Acoustic graph

Acoustima102 Wooden panel

Acoustima102 Acoustic graph

Then color is an infinite option and any color that comes to mind is possible.

If you do not have a technical requirement from an acoustic engineer that restricts you to a particular model,

then we can say that in general when it comes to a site that requires a high level of acoustics and dealing with heavy noises, we suggest that you select a panel that is both channeled and perforated.

But if your site needs to deal with an area that is not very acoustically problematic then you can choose a model that is perforated only.

You see now without being an acoustic engineer you already can understand that wooden panels with both channeled and perforated have higher acoustic value from perforated only,

also you know that the acoustic value of those panels is getting increased by how much intense the perforating is, so holes size and their intensity level are aspect that influence on their acoustic performance.

If you know that there is no requirement for high acoustic performance but the requirement is more for Innovative and interesting design so go ahead with our models such as Acoustima model 224, or 225, 226 or 227 and etc which are adding beautiful scene to your site!!! for full catalog with all models download here, We are waiting your request.

Acoustima model 224

Acoustima model225

Acoustima model 226

Acoustima model 227