Acoustic solution for cinema

From past to now until the next hundred years or more, cinema stills the
entertainment for all ages and inclinations which strongly needs a clear sound reaching the listener’s ear. And we all want a convenient, favourable, and pleasing sound. But What should intender do, then?
Figure out the best locations for the screen, seating, AV components and
speakers and determine what type of acoustical treatments can be used to help improve the sound.

Let us focus on the situation of sound wave in the cinema hall.
Sound waves will travel from the speakers and bounce off of just about any flat surface in a room. The ceiling, walls, floor, etc. Contained within a cube room, it is more likely for standing waves to occur. ”A standing wave is a low- frequency resonance (reinforcement of sound by reflection) caused by a source wave colliding with a reflected wave of the same or similar frequency”.

So, it should be mitigated because they can cause three different acoustical
issues:

• An area of high pressure where there is a very noticeable increase in volume.
• A resonating sound wave. Sounds extending for longer than they were
  intended.
• An area of low pressure where there is a very noticeable decrease in volume.
  Even the most expensive sound system available – resulting in poor quality with
  hard to make out dialogue and exaggerated bass response.
  There are several golden rules which should be applied to the design of the room to ensure the best possible audio experience.
  How do Acoustima® acoustic panel by Seatup Turkey® provide Acoustic solution for cinema:
  First of all, sound transmission occurs through doors and windows so there is always just one small door in the corner of the cinema.
  With regard to shape, Go with the rectangle space. Practically speaking, you’ll have better seating and furniture placement options. Technically speaking, rectangular spaces lend themselves to better sound than square rooms that can create annoying resonances and other sonic problems.
  In order to avoid echoes completely, the surface shapes must be created so as to diffuse or absorb the incident sounds. Multiple reflections between two parallel planes may cause flutter echoes. Although it is easy to avoid them by making the two planes non-parallel or the surface undulated.

About size, there are so many different recommended ratios for size out there that deciding on which one is “right” can be difficult so any one can offer good performance.

Other important issues:

Sound waves and acoustic reflections can influence essentially sound from the speakers should not reflect back on the same path but dissipate naturally, which can otherwise cause a muddled or bass-heavy sound.

room structure: the walls should be constructed closer together in the front

(where the display will be located) and further apart near the back of the room.

This will help tremendously with the acoustics of the room. Sound waves

typically bounce more when they meet a 90-degree corner of a room.

After designing size and shape of the structure, the next basic step for Acoustic solution for cinema is Insulation.

Sound is transmitted mostly through walls and floors by setting the entire

structure into vibration. This vibration generates new sound waves of reduced intensity on the other side. The passage of sound into one room of a building from a source located in another room or outside the building is termed ”sound transmission”. Sound insulation describes the reduction in sound across a partition. The sound insulation across a good conventional, lightweight, office to office construction is typically in the order of 45 dB. That happens by adding acoustic materials which have high sound absorptivity in the construction phase.

Acoustima® acoustic panel by Seatup Turkey® use other tools to get the best possible sound. Which is the final and core step, acoustic panels.

A full outer skin of Acoustima® acoustic panel by Seatup Turkey® sound

deadening can ensure sound does not leak into adjoining rooms which has the advantage of ensuring sound levels are maintained in the room.

Fortunately, there are several ways to absorb the sound and mend it in the

lounge for a unique sound experience, as Acoustima® acoustic panel by Seatup Turkey® we improve products to solve this kind of problems (Acoustic solution for cinema).

By using acoustic panels which make a special role in blocking, absorbing and minimizing the sound waves. So that treat echo and reflection.

As it turned out, acoustic panels or acoustic fiber can be fixed on floors, walls,
ceilings, and furniture. Using available surfaces to benefit from the place.
However, one of the important cinema projects that Acoustima® acoustic panel by Seatup Turkey® improves is the Cinetima Cinema in Bursa Özdilek parkı. In this cinema, as the photos show, one of the halls its wall has been covered with high-acoustical properties wooden panels in sloping shape and there is LED light between panels by Acoustima® acoustic panel by Seatup Turkey®.
Moreover, Acoustima® acoustic panel by Seatup Turkey® has added the
acoustical carpet and doors. In addition to the comfortable design of the seats which has also acoustical properties which you can find in the cinema and movie catalogue:
https://www.seatupturkey.net/wp-
content/uploads/2018/12/Seatup_Turkey_Kat_Temmuz_2018_Cinema-Movie-
Theater_2-compressed.pdf

the other hall cinema has mostly the same design but different type of acoustic panels, its panels is classic Rockwool acoustic panels which installed by Acoustima® acoustic panel by Seatup Turkey®.
The reception hall has totally different, modern and aesthetic design especially the design of the STRETCH LED CEILING which Acoustima® acoustic panel by Seatup Turkey® installed and you can find it in its catalogue also:
https://www.seatupturkey.net/wp-
content/uploads/2018/09/Seatup_Turkey_Kat_Acoustima.pdf

also; added Acoustima® acoustic panel by Seatup Turkey® the seats in the
reception hall with acoustical properties which has the circular shape that helps in saving the space.

In Bursa, you can notice two more special acoustically designed like
Cinemaximum cinema in Suryapı and Carrefour shopping malls where these cinemas’ reception halls have special metallic suspending ceiling with acoustical properties. Also, Avşar cinema in AS Merkezi and Kent maydani shopping malls where these cinemas have colorful acoustically designed cinema halls.

As a summery; Acoustima® acoustic panel by Seatup Turkey® can help you in different, modern, and acoustically designed cinema. Also, you can see our online catalogue:

how to combine Led lighting in the acoustic panels and Cinema hall ?

The idea of combine and install led lighting in the Cinema hall and even in Auditorium hall is a quite familiar to you as I guess. We all know that it is adding very fancy look to the cinema, but how to decide the design and shape?

First you need to analyze the size of your movie theater /Cinema hall.

Does it has stairs? In the cinema hall, a line of LED lighting is installed on all the stairs.

But if it is a conference hall or Auditorium, there is no need of line on each step,

but you can install the LED on every 3 or 4 steps.

The importance of LED lighting in the cinemas on the stairs is especially  to help the audience

to orient themselves in the space especially when they arrive after the lights in the hall have been turned off and the

stair lights warn them not to fall. In some cases, there are no stairs in the hall, and in such a situation, the LED

lighting should be installed to the extent of the hall around it.

Of course when it comes to a movie theater  and cinemas after  the film has been started all the lights are turned off

including the LED light and it is lit again towards the end of the movie or during commercials.

And there is also the LED light that is inside the wall between the acoustic wall panels. Such lighting adds a great

deal of aesthetics and a look of luxury to the hall.

You can design straight and short lines horizontally or vertically. And if you want something more special then you

can draw diagonal lines or literally shapes such as hexagons and more.

What is important is that the owner of the cinema has simple and fast control over turning off the LED lights, since

they can sometimes be too harsh to the eye or simply need to be switched on or off. It is highly recommended to

create a few separate lines in the hall so that it is not just one switch that turns off everything at once but rather has

to be separated and divided between the lines in order to create control over the amount of LEDs you want to turn on

and off. This will give you more flexibility to decide how much you want to light each time. Depending on changing

situations, you may choose to use a larger or smaller amount of LED lighting so that as many lines as possible are

separated in the hall. This will also allow you to design the hall with a different color LED bulb and you can also use

it as a sign. For example, you can determine that when a red LED appears, this is a commercial break and when

blue LED turn on then it is a sign that the movie is about to start soon, etc.

If so, let us say that the LED light is not only an aesthetic and impressive design but also an important tool in the

cinema halls in order to warn visitors from the stairs in the dark hall and also to mark different things to them.

However, LED lighting is a particularly good option in order to prepare the hall for fancy look and impressive style

that attracts visitors.

We manufacture Acoustic panels and chairs for cinemas and will be happy to help design and install the LED lighting

between the panels in the wall  or by the lighting strip on the stairs.

For details:

export@seatupturkey.net +905427196712

led lighting by Acoustima and seatupturkey

led lighting by Acoustima and seatupturkey

led lighting by Acoustima and seatupturkey

led lighting by Acoustima and seatupturkey

Wooden panel and led lighting by Acoustima and seatupturkey

The favorite 3D Acoustic panels will be those one that have unique design and innovative ideas but they also must to be at the same time significant acoustic value panels that will improve the acoustics on your site, in your cinema hall or in the Auditorium or in whatever building that you have even if its a private house or any kind of public building.

And it’s time to introduce you to the five (5) shapes we’ve molded into three-dimensional acoustic panels.             most of them inspired from the nature but some also inspired by the sweet food that we like, and here are they :

1. Acoustima spin® Panel in the size of 60×60 or upon request. The panel look like a spin shape inspired from the shape that appear in the nature. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.
   

   Acoustima spin®

    

    

    

   

   Acoustima spin® inspired by spin in nature

2. Acoustima crater® Panel in the size of 60×60 or upon request. The panel look like a carter shape inspired from the shape that appear in the nature. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.

Acoustima Crater®

Acoustima crater® inspired from the nature

3. Acoustima waterwave® Panel in the size of 60×60 or upon request. The panel look like a wave in the sea inspired from the Ocean. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.

Acoustima waterwave®

Acoustima waterwave® panel inspired from the Ocean

4. Acoustima Pyramid® Panel in the size of 60×60 or upon request. The panel inspired from the pyramid shape.          As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric.               for technical information here: datasheet

Acoustima pyramid®

Acoustima pyramid® inspired by the pyramids

5. Acoustima Waffle® Panel in the size of 60×60 or upon request. The panel inspired from the famous belgian sweet waffle. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric.  for technical information here: datasheet

Acoustima Waffle®

Acoustima Waffle® Panel inspired by the sweet waffle

You shall free to offer us new shapes for 3D acoustic panels we will be able to apply any shape you like.

In Acoustima® we work for you to fulfil your dreams!

Our best models for cinemas are CN700 as well as CN800
What makes them our best movie seats is the back shape of their agronomic seat which is adjusted for sitting over time. The back seat if you like can flexibly move back to those who like to swing slightly. But you can also fix the seatback so that it does not move back.

In fact, we call it the ultimate cinema seat, but Please note that in auditorium halls it can be used as a VIP seat in the first row.
You can read all the technical details by downloading the following file: Technical specifications for a movie seat.

We will only mention that this is a seat that is covered with artificial leather at the highest level, whose color is not sensitive to light, what is called anti-UV, and of course it has the highest degree of anti-combustion. In addition, the fabric is easy to clean and resistant to water and chemical liquids, so that even if the coke is poured on the seat it will be easy to clean it without fear of damaging the upholstery.

This seat was upgraded and developed after years of observation and experimentation of many models of movie theaters. The holder of the glasses are in a very comfortable and efficient position in the armrests.

You can choose between a curved shape handrest with the cup holders  or a flat armrest when the cup holder is installed in its front separately.

Now you can simply view the attached pictures and simply enjoy the sight of a winning seat at a surprising price! Please contact us for a quote today for this wonderful cinema session.

CN700 model by seatupturkey

CN800 model by seatupturkey

Application of CN800 model by seatupturkey

What like the buildings of 2018 will be look like?

It is difficult to predict the future, but it is very reasonable to assume that as modern construction grows, so does the need for efficient solutions to prevent noise problems in buildings or lets say it in more professional language what is called the level of the acoustic value in buildings. The role of the acoustic panels, which are installed on the wall and ceiling, is to absorb these noises in order to prevent the echo effect that occurs in large empty spaces or in places where the ceiling is high.

One thing is sure that all interior designers from the best in the world and the most benign in the world all agree and know that the modern design of 2018 must include more and more elements that give expression to the acoustic value in the building.

One of the most impressive solutions that also give an innovative neural look to the structures and also significantly improve the level of acoustics in the structure and blocking the echo created in large spaces, is the panel called Canopy panel and Baffle panel

These panels are hung on the ceiling with a metal wire. When you look in front of you see different shapes hanging from the ceiling at different heights . There is no doubt that the Canopy panel and Baffle panel should be both increasingly used today in public buildings and even in offices and private homes. The panel gives a design look to the room and also helps to deal with noise problems in buildings.

You can purchase the panel at a surprising price!

Canopy panel and Baffle panel

www.acoustima.com

+90 5427196712