No
one can ignore or refuse the fact that airports have a very genuine noise
pollution problem. When we focus so much on noise we awake about hearing
impairment, noise-induced hearing loss, tinnitus, stress, increased risk of
accidents, and so many physical and psychological health problems.
In
addition to this, especially in airports, there is a need to quiet to be
attention for calls and notes they broadcast.
So
that limiting exposure to loud noises (Acoustic solution for airports) is very
important.
Aircraft noise pollution is a harmful noise
effect produced by any aircraft or its components during the various phases of
a flight. Sound production is divided into three categories:
Mechanical noise—rotation of the engine parts, most
noticeable when fan blades reach supersonic speeds.
Aerodynamic noise—from the airflow around the surfaces
of the aircraft, especially when flying low at high speeds.
Noise from aircraft systems—cockpit and cabin
pressurization and conditioning systems, and Auxiliary Power units.
sound
level near the airfields generated during noisy aircraft ground operations. In
the vicinity of airports, noise is affected not only by landing and taking off
of aircraft but also by noisy aircraft ground operations. The resultant sound
level nearby airports is affected also by certain ground operations which are
related to taxiing of an aircraft from stand or sleeve to the beginning of the
runway, and after landing, from the runway to the stand. Noise levels emitted
by those operations are very harmful to the ground crews.
Acoustic
solution for airports is to reduce the level of noise by using sound absorption
panel.
The
function of absorptive materials is to transform impinging acoustic energy into
heat. Because the energy contained in sound waves is normally very small, the
quantity of heat generated is also small.
Acoustima®
acoustic panel by Seatup Turkey® can work on Acoustic solution for airports by Noise
control or noise mitigation which is a set of strategies to
reduce noise pollution or to reduce the
impact of that noise, whether outdoors or indoors.
Acoustima®
acoustic panel by Seatup Turkey® has wide collection of options with variable
usage, colours, and models.
CLASSIC
CEILING, STRETCH LED CEILING, ACOUSTIC CANOPY, ACOUSTIC BAFFLES, ACOUSTIC
CARPET, ACOUSTIC DOORS, ACOUSTIC WOODEN PANELS FOR WALL AND CEILINGS, with the
ability to use LED DESIGN.
Acoustima® acoustic panel by Seatup Turkey® has been providing acoustic treatment to soundproofing, noise control, acoustical and vibration problems for over 23 years. Soundproof panels and acoustic materials, almost solving any noise problem including Acoustic solution for airports. Focusing on environmental and architectural acoustics, assuring cost-effective and reliable acoustic solutions for clients.
One
of the most commonly used acoustic panels is linear wooden acoustic panels. Without
holes, it considered as a reflector but with holes in back it behaves both
reflector and absorber to the acoustic wave which makes sound clear and warm at
the same time creating a clean linear effect on walls and ceilings across a
range of applications, this panel style offers a warm organic finish, ideally
suited to use in lecture theatres, meeting rooms and public buildings. linear
wooden acoustic panels in their design depend on absorption coefficients that
are an average of how absorptive each product is at numerous frequencies,
generally at 500 Hz, 1000 Hz, and 2000 Hz. Generally speaking, soft, porous materials
will be more absorptive than hard, reflective surfaces.
Standard
hardboard is made of wood fibers, usually with the addition of resin, and
tempered by coating with a thin layer of linseed oil and baking at a high
temperature to polymerize the oil. This provides more water and impact
resistance, hardness, rigidity and tensile strength. Hardboard will bend and
warp with age and in the presence of moisture, and will sag under heavy weight
(the exact weight is based on the dimensions and quality of the hardboard)
unless secured to even weight distribution among several mounting points. Wood
is sometimes selected for aesthetic reasons. It may be chemically treated for
strength and fire-retardant characteristics or turned into plywood first. Also,
it may be mounted as a thin strip instead of the squarer shape of panels.
linear
wooden acoustic panels can be the acoustic solution for many places and
applications. Acoustima® acoustic panel by Seatup Turkey® Linear Wall Panels
can be installed either horizontal or vertical. Relating the design in the
field, panel width, length and the space between each slat can be adjusted. We
can produce any custom sizes.
Acoustima® acoustic panel by Seatup Turkey® offer a wide range of finishing options and can cater to your needs in terms of fire classification, sustainability and appearance. We can also provide architectural joinery items such as custom trim, skirtings and returns, so you can be sure of consistently high quality and a project that runs more smoothly.
Market, the place which everyone needs it and where we all visit every day Imagine the numbers of people crowded there, this boy shouts to take his order, another woman calls her neighbour by phone to share opinion, group of girls talk some nonsense and for sure do not forget, sellers hoot to attract customers.
However,
many smaller arcades have been demolished, replaced with large centers or
“malls”.
A
shopping mall is a modern term, in which one or more buildings form a complex
of shops representing merchandisers with interconnecting walkways that enable
customers to walk from unit to unit, by the fact that connecting walkways are
not owned by a single proprietor.
The
size of shopping centers and malls continued to increase with approximately
220,000 m2, some of them have 8,600 parking spaces and others have 350,000 m2. Currently, the
largest mall in the world is in China with a gross floor area of 892,000 m2.
Shopping
centers are frequented by numerous people not only for shopping activities but
also for social and leisure purposes. The considerable size of some of the
malls, with large circulation spaces, high ceilings and generally a large food
court where large numbers of people gather, leads to elevated background noise
and reverberation time values, which result in poor speech intelligibility in a
noisy space so what is Acoustic solution for shopping centers.
Results
of a study in shopping malls with a total area from 12,000 to 72,000 m2 show
average RT (reverberation time) values between 1.7 and 3.2 s, and LAeq (sound
loudness level) between 67 and 70 dB.
Noise
occupational density in all shopping centers, indicating a fairly common
acoustic environment for all malls. The level of occupancy noise showed a
rather excessive value for acoustic comfort and well-being in shopping centers.
Not Sound and noise in shopping malls only by the feeling of discomfort but
also for “incompatibility” relatively to speech intelligibility.
When
noise is high makes an acoustically unfavorable space, especially if it
intensifies in frequency with the highest hearing sensitivity, between 1 and 4
kHz.
Of
all the characteristics, the main negatives points for acoustics are number of
floors, height and volume; gallery configuration linking the different spaces
of the malls assisting in the spread of noise; reduced area of food courts
concentrating people and centralizing activities and access; surface coatings
with reflective materials (such as ceramic, marble or ceramic tiles) and glass
surfaces; little or no application of absorbents materials and systems; noisy
machines and equipments, little or nothing acoustically treated; carts without
silent bearings and chairs and tables with worn rubber or without them
producing noise when dragged. In contrast, the positive characteristics
observed in some of the cases studied are: height and volume reduced; spatial
configuration like long corridors, with little interaction between the spaces;
large food courts so as not to agglomerate people, and consequently the noise.
Other favorable characteristics detected that, in the absence, can also be
taken as intervention proposals, include: acoustic treatment of the particular
noise of machines and equipments through quieter cooling
systems/ventilation/others; presence of rubber in the legs of tables and
chairs; silent bearings in the carts; and especially lesser application of
reflective materials over sound absorptive, for example, perforated panels
and/or baffles in the ceiling, porous and fibrous materials in the decorative
objects (tissues, cushioned) and on the walls (wood fiberboard agglomerate,
etc.), as well as more areas with sofas and carpets. Note that these and many
other examples can be considered for proper acoustic corrections.
In
general, a minimal careful acoustical design can decrease the average RT up to
1.5 s, increase the average RASTI up to 0.10 and decrease the occupation
background noise in 3 dB(A).
Therefore,
succinctly: for Acoustic solution for shopping centers to reduce the
reverberation of space through the type and shape of the surfaces and volume;
increase sound absorption and reduce the effects of noise sources, in order to
reduce ambient noise. Sound absorption of the environment is the basis of the
best results of the acoustics of shopping centers. All these factors contribute
for better speech intelligibility, better quality and comfort of space,
consenting users to spend more time in shopping centers.
Moreover, you can see
the acoustical solutions in shopping centers in Turkey, Bursa. Since, Bursa is
crowded by the modern and acoustically designed shopping centers.
One of the acoustically designed centers
is Sur-Yapıcenter, this
shopping center as photos show has used the MDF wooden panels on the walls in
the walkways in the slat shape
with a small space between pieces which help in increasing the NRC rating to
0.80-1.0.
there
is also MDF wooden suspending ceiling in each floor in combination of two
shapes in the plain shape which has NRC approximately 0.46 and the other shape
is the slat shape with NRC 0.80, this combination has a role in the Aesthetic and the
Acoustic section.
Also, it used the shape of dome in the middle of the shopping center which helps in reducing the noise by using the
resonant cavity method because of its
concave shape to reflect the sound by delay time and this will canceling the
echoes in the space, in addition the floor is ceramic that has an acoustically
and thermally properties.
And, there are acoustical wooden seats in the halls and walkways give
the shopping center a unique view and plays a role in the acoustic solution in
the shopping centers.
Most of the shops in this shopping center use the acoustic panels in
their shops especially the cafe-book which has the acoustic panel in different
shapes.
you can
notice special acoustically designed in Suryapı Cinemaximum cinema. its hall cinema has
the design of classic Rockwool acoustic panels, its panels is classic Rockwool
acoustic panels and seats in the cinema has also acoustical properties helps in
reducing the noise
You can read more in detail about
the acoustic solutions in cinema in our blog of Acoustima® acoustic panel by
Seatup Turkey®:
in
Bursa; you can see a different, unique and acoustically design in each shopping
center like Carrefour shopping mall; AS merkezi shopping mall ;kent maydanı
shopping mall and Özdilek shopping mall.
We
live in a noisy world. And shopping is one of our noisy everyday experiences.
There
are people who prefer peace and quiet. There are those with hearing problems.
Those with a sensitivity to loud noise. There are elders who get stressed out
by loud music. There are kids and youngsters whose hearing is at odds when the
sound is too loud. In fact, there are tons of people who are not comfortable
with loud noise in stores.
Of
all the construction requirements which carry a particular project, perhaps the
most ignored is Acoustics because the aesthetics almost always tends to
overlap. However, these are old approaches that can no long happen. In the long
run an acoustically bad space will have fewer customers than others better
designed.
All-day
Quiet Shopping. Quiet Night. Relaxing Shopping. Hush Night. The name
alternatives are many. The core idea is to show empathy and love to all those
customers who wish to be able to shop without the blasting, unnerving music.
For
Acoustic solution for shopping centers Please, create some room for shoppers
who crave a soothing and relaxing shopping experience. You are bound to be
financially rewarded for such an inclusive and warm-hearted activity.
Acoustima® acoustic panel by Seatup
Turkey® can help you in different,
modern, and acoustically designed Acoustic solution for shopping centers. Also,
you can see
our online catalogue:
Building a new construction is something very costly especially ones that are huge, luxe, and have goal to their own application. Imagine all contributor in a building ‘like theatre’ engineers, workers, materials, ground, furniture…. Etc.
Ones which need a specific sound performance utilization like opera hall, theatre, cinema, concert, and speech each one needs its own design for structure and added acoustic panels because they differ in their behaviour to sound like reverberation time, clarity, warmness, and other acoustic parameters. These acoustical characteristics of a hall depend on cubic volume, interior shape, density of materials and on surfaces and size, spacing and number of the chairs, carpets or other sound absorbing materials.
The acoustical quantity that can be measured fundamentally is the reverberation time. As a reference for the acoustic design, this specifies the preferred mid- frequency reverberation time depending on the type of music (amplified music, loud acoustic music and quiet acoustic music) as a function of room volume. Also the study of Acoustical characteristics of a hall either before or after construction and describing the architectural features of a multipurpose hall which is used for lectures, musical performances, and other cultural events are very important.
For example, the hall for amplified music has a volume around 1800 m3 and the corresponding recommended reverberation time is 0.7 – 0.9 s. The hall for acoustic music has a volume of around 3300 m3 and the corresponding reverberation time for loud music is 1.4 – 1.8 s.
For quiet music, the reverberation time could be longer than 1.8 s, up to about 2.2 s.
The following conclusion can be drawn: hall which is too small (volume, height) and has too short reverberation time to work well for acoustic music, and the limited size of the stage will limit the hall to small ensembles applying sound reinforcing equipment.
In other words, the hall will be best suited for amplified music, even though more bass absorption would be feasible. The reverberation time will be suited for speech as well. The hall will be acoustically satisfying for other planned activities such as children theatre, debates and authors reading aloud.
Important success factors for achieving satisfying room acoustics within these halls will be as follows:
Fine tuning of the diffusing/curved walls in the multipurpose hall. optimising the bass absorption in particular (stiffness of curved plates, depth of cavity and amount of mineral wool in the cavity).
Choosing sound-absorbing curtains of high quality in the multipurpose hall of the library; read thick/heavy curtains with a generous cavity between the curtain and the glass walls, again in order to achieve sufficient bass absorption.
It is observed that the measured and simulated RT values have better agreement. This indicates that the decay is completely linear and the hall has attained a satisfactory diffuse sound field. The acoustical parameters and the materials used have resulted in deciding the acoustical quality of the hall.
For profit, utility, efficiency, and of course economy destinations. Multi- purpose hall is designed to reach the perfect sound performance for many implementations. It changes its shape to fit sound conditions that are used for. In addition to this acoustic panels can appear/disappear or change its angle to reflect more/fewer acoustic waves due to their necessity.
Acoustima® acoustic panel by Seatup Turkey® provides many Acoustic carpet (Textile floor): Reusable and availability of many colours and patterns models. Acoustic doors: The right door and sealing systems, the noise will be contained and controlled.
Acoustic celling: ACOUSTIC WOODEN PANELS, CLASSIC CEILING & STRETCH LED CEILING are available. Acoustic walls: We provide both CLASSIC ACOUSTIC PANEL and 3D ACOUSTIC PANEL which have variety of colours and shapes. Acoustic fibre: Converts other panels, especially chairs and carpet. Acoustic seats: Different collection with changing the materials (foam, fabric, metal, wooden, and plastic) Acoustima® acoustic panel by Seatup Turkey® products are recommended too choose from the Elegant series or from our Catalogue for Theatres seating. Acoustima® acoustic panel by Seatup Turkey® works on acoustic solutions to give listeners a quiet, comfortable place to gratify.
From past to now until the next hundred years or more, cinema stills the entertainment for all ages and inclinations which strongly needs a clear sound reaching the listener’s ear. And we all want a convenient, favourable, and pleasing sound. But What should intender do, then? Figure out the best locations for the screen, seating, AV components and speakers and determine what type of acoustical treatments can be used to help improve the sound.
Let us focus on the situation of sound wave in the cinema hall. Sound waves will travel from the speakers and bounce off of just about any flat surface in a room. The ceiling, walls, floor, etc. Contained within a cube room, it is more likely for standing waves to occur. ”A standing wave is a low- frequency resonance (reinforcement of sound by reflection) caused by a source wave colliding with a reflected wave of the same or similar frequency”.
So, it should be mitigated because they can cause three different acoustical issues:
An area of high pressure where there is a very noticeable increase in volume.
A resonating sound wave. Sounds extending for longer than they were intended.
An area of low pressure where there is a very noticeable decrease in volume. Even the most expensive sound system available – resulting in poor quality with hard to make out dialogue and exaggerated bass response. There are several golden rules which should be applied to the design of the room to ensure the best possible audio experience. How do Acoustima® acoustic panel by Seatup Turkey® provide Acoustic solution for cinema: First of all, sound transmission occurs through doors and windows so there is always just one small door in the corner of the cinema. With regard to shape, Go with the rectangle space. Practically speaking, you’ll have better seating and furniture placement options. Technically speaking, rectangular spaces lend themselves to better sound than square rooms that can create annoying resonances and other sonic problems. In order to avoid echoes completely, the surface shapes must be created so as to diffuse or absorb the incident sounds. Multiple reflections between two parallel planes may cause flutter echoes. Although it is easy to avoid them by making the two planes non-parallel or the surface undulated.
About size, there are so many different recommended ratios for size out there that deciding on which one is “right” can be difficult so any one can offer good performance.
Other important issues:
Sound waves and acoustic reflections can influence essentially sound from the speakers should not reflect back on the same path but dissipate naturally, which can otherwise cause a muddled or bass-heavy sound.
room structure: the walls should be constructed closer together in the front
(where the display will be located) and further apart near the back of the room.
This will help tremendously with the acoustics of the room. Sound waves
typically bounce more when they meet a 90-degree corner of a room.
After designing size and shape of the structure, the next basic step for Acoustic solution for cinema is Insulation.
Sound is transmitted mostly through walls and floors by setting the entire
structure into vibration. This vibration generates new sound waves of reduced intensity on the other side. The passage of sound into one room of a building from a source located in another room or outside the building is termed ”sound transmission”. Sound insulation describes the reduction in sound across a partition. The sound insulation across a good conventional, lightweight, office to office construction is typically in the order of 45 dB. That happens by adding acoustic materials which have high sound absorptivity in the construction phase.
Acoustima® acoustic panel by Seatup Turkey® use other tools to get the best possible sound. Which is the final and core step, acoustic panels.
A full outer skin of Acoustima® acoustic panel by Seatup Turkey® sound
deadening can ensure sound does not leak into adjoining rooms which has the advantage of ensuring sound levels are maintained in the room.
Fortunately, there are several ways to absorb the sound and mend it in the
lounge for a unique sound experience, as Acoustima® acoustic panel by Seatup Turkey® we improve products to solve this kind of problems (Acoustic solution for cinema).
By using acoustic panels which make a special role in blocking, absorbing and minimizing the sound waves. So that treat echo and reflection.
As it turned out, acoustic panels or acoustic fiber can be fixed on floors, walls, ceilings, and furniture. Using available surfaces to benefit from the place. However, one of the important cinema projects that Acoustima® acoustic panel by Seatup Turkey® improves is the Cinetima Cinema in Bursa Özdilek parkı. In this cinema, as the photos show, one of the halls its wall has been covered with high-acoustical properties wooden panels in sloping shape and there is LED light between panels by Acoustima® acoustic panel by Seatup Turkey®. Moreover, Acoustima® acoustic panel by Seatup Turkey® has added the acoustical carpet and doors. In addition to the comfortable design of the seats which has also acoustical properties which you can find in the cinema and movie catalogue: https://www.seatupturkey.net/wp- content/uploads/2018/12/Seatup_Turkey_Kat_Temmuz_2018_Cinema-Movie- Theater_2-compressed.pdf
the other hall cinema has mostly the same design but different type of acoustic panels, its panels is classic Rockwool acoustic panels which installed by Acoustima® acoustic panel by Seatup Turkey®. The reception hall has totally different, modern and aesthetic design especially the design of the STRETCH LED CEILING which Acoustima® acoustic panel by Seatup Turkey® installed and you can find it in its catalogue also: https://www.seatupturkey.net/wp- content/uploads/2018/09/Seatup_Turkey_Kat_Acoustima.pdf
also; added Acoustima® acoustic panel by Seatup Turkey® the seats in the reception hall with acoustical properties which has the circular shape that helps in saving the space.
In Bursa, you can notice two more special acoustically designed like Cinemaximum cinema in Suryapı and Carrefour shopping malls where these cinemas’ reception halls have special metallic suspending ceiling with acoustical properties. Also, Avşar cinema in AS Merkezi and Kent maydani shopping malls where these cinemas have colorful acoustically designed cinema halls.
As a summery; Acoustima® acoustic panel by Seatup Turkey® can help you in different, modern, and acoustically designed cinema. Also, you can see our online catalogue:
Acoustic solutions for Museums: Our Acoustic solutions for Museum can be see now in One of the most marvellous exciting places in Bursa / Turkey to visit, it is the Panoramic Museum in Bursa and it is the largest full panoramic museum in the world that consists of a main theme revitalization hall, exhibition halls and meeting rooms, cafeteria, and administrative departments. The foundation was laid on 15 September 2015, On November 1, 2018, was opened. Construction area: 4.500 m² / Usage area: 8.388 m² The panoramic museum is telling the story of the history of Bursa from the day that the old city has been conquered by the Ottoman, and as well the story of the 6 Ottoman sultans who buried in Bursa. In the entrance of the Museum you can find 16 paintings describing the social life in their time. of the big 6 Ottoman sultans .
Can you imagine the noise which can propagate there? Acoustical and physical researchers appreciate the reverberation time of this kind of climes about 11 s. In other words, noise pollution. This value is due to many factors, let us analyse them one by one:
And then see how our Acoustic solutions for Museums can help …
Enormous space volume which is proportional parameter to reverberation time.
The existence of reflection surfaces.
Low sound absorptivity because of the lack of areas that have high absorption coefficients. The impact of noise on workers and visitors as well can cause serious health damages and problems. So how can they adjust this to make cosy place to sound? Acoustima® found Acoustic solutions for this Museum by applying perfect sound insulation and noise reduction by consultation specialist acoustical engineers. The operation needs two basic steps the first one deals with architectural acoustic (the science and engineering of achieving a good sound within a building and is a branch of acoustical engineering.), in other words, the structure, shape, size, and constitution of the building. On the other hand, whereas, room acoustic is considered a strongly effective solution that depends on additional components have high sound absorption coefficient reach up to 0.9 which called ACOUSTIC PANELS.
Acoustic solutions for Museum by using Acoustic panels are sound absorbing panels that are hung on a wall or ceiling to control and reduce noise, eliminate slap echo in a room. The objective is to enhance the properties of sound by improving sound quality and soundproofing which concludes any means of reducing the sound pressure with respect to a specified sound source and receptor. These sound absorbing panels come in a large variety of sizes, types and colours to meet your design, budgetary, and durability requirements. Absorbing sound spontaneously converts part of the sound energy to a very small amount of heat in the intervening object (the absorbing material), rather than sound being transmitted or reflected. There are several ways in which a material can absorb sound.
The choice of sound absorbing material will be determined by the frequency distribution of noise to be absorbed and the acoustic absorption profile required.
in the museum: To apply Acoustic solutions for Museum at the first floor; you can see the auditoriums which display a movie about the ancient culture of Turkey, you can notice that the auditorium is acoustically designed by adding perforated, wooden acoustic panels on the walls which efficiently absorb the sound by means of reducing the noise in the Auditorium.
Also; there are wooden suspending ceiling acoustical panels which it absorbs sound.in addition; it contains acoustical seats generally made from foams and has high acoustic properties, and each auditorium has a Soundproof acoustic door which commonly made from wood are an ideal cost-effective solution because it does not need much coating but absorbs sound by its self moreover, they are suitable for a wide variety of applications in any room, office or hall.
out of the auditoriums; there is a big field in the middle designed as non- parallel wall; it has a semi-circle shape; the walls’ shape can highly kill the reflected sounds thats lead to minimize the noise and the reverberation time inside it.
this field look like a small amphi-theater and the stairs has seats with acoustic properties, the ceiling is full with the wooden acoustic panels which have the shape of compact slats has a very small gap between each others, aproximmetly thes panels has NRC value around 0.88.
On the right hand of the field, there is a small fair shows the green tomb tiles that used in building the historical green mosque in Bursa. This type of tiles represents the first ceramic art in Turkey. These ceramic tiles was used to improve the acoustical and thermal performance of the floating floor to reduce the walking noise side by side of giving the place an unique, wonderful and surprised aesthetic view.
Next to the fair there is a gift shop, has a cylindrical shape with also wooden suspending ceiling and its roof has un expected, huge and fantastic optical acoustical canopy in the middle of it which plays an important rule in the acoustical control by means of provide a comfortable and un-noisy corner with also high-quality, simple shape and colourful seats at the roof of the shop.
On the other side, you can notice a library contains some wooden tables and foam chairs, there is also wooden shelves contains numbers of historical books, and its ceiling is installed by the same acoustic panels at the interring hall in the middle of the museum.
Finally, in the corner you can notice a small cafe to take a rest after this interesting tour inside the museum, which bring comfort inside you by its design which has wooden tables, wooden acoustic panels on the ceiling and wooden bar as well as the foam seats has a brownish color which perfectly goes with the wooden tables. In the second floor there is the panoramic part that depicts the conquest day in a 360-degree circular cycle and tells the journey of Bursa from Beylikdian to Cihan State.
This new museum that opened in 2019 can tell us how much is the Acoustic solutions for Museum important to give the comfortable environment without any ambient noise to the visitor and achieve the mission of the project successfully.
Noise in hospitals: Florence Nightingale (1859) said: “Unnecessary noise, then, is the cruellest absence of care which can be inflicted either on sick or well “ As you know hospitals must have a controlled sound level and we all maintain on our quietness when we visit a patient. However, there are many noise sources like speakers’ voice or devices, but WHY that is important issue?
According to US National Library of Medicine Critical Care Journal: The report noted that noise levels in intensive care units ranged from 50 to 75 dBA, with the highest night peak level even reaching 103 dBA (louder than a lawnmower).
The problem of Noise in hospitals can cause calamity effects which strongly match sick aside from doctors and employees. Someone who is a doctor says ”We do mistakes because we can’t hear what is said!” In additional, sleep and restorative periods should be regular for ill people if not then, additional medication required surgical patients when SPL >60dB (sound pressure level) due to Noise in hospitals. Noise levels in Johns Hopkins Hospital shows Frequency and Neighbourhood Effects on Auditory Perception of Drug Names in Noise (Lambert) that 3.9 million “wrong drug” errors in US retail pharmacies each year.
(e.g., Zyrtec/Zyprexa, Celebrex/Celexa, Toradol/Tapazole), many due to confusion between similar names confusion. Acoustima® acoustic panel by Seatup Turkey® provide acoustical solutions for Noise in hospitals involves insulator solutions and acoustic panels which have absorptivity up to 0.9. Some important numbers about Noise in hospitals: World Health Organization: – 0.6 sec reverberation time for patient rooms. – Lmax(A) no more than 40 dB(A). – Leq of 30 dB(A) in rooms.
ANSI Standard:
– RC(N) values of 25-45 (Room criteria measures have been developed to
evaluate existing background noise levels in rooms).
US EPA:
– Ldn of no more than 45 dB(A).
Different collection of acoustic panels for celling, walls, flour, and furniture with changing the materials (foam, fabric, metal, wooden, and plastic), color, and style Acoustima® products are recommended too.
Can you imagine if there is alot of children in the room how it will be?!!,
or the level of the noise inside and outside the room?!
This noise is one of mainly problems in the schools zones (such as
lecture halls, Auditoriums,gymnasium, multi-purposed rooms, ….etc)
that needs acoustical solution.
In the recent years; Acoustima® acoustic panel by Seatup Turkey®
developed a wide range of acoustical solutions for schools in mean of
helping in the effective education without noise. This acheived when:
Reduce the disturbance from background.
Make sure the whole school gets proper acoustic treatment.
Choose safe products. One of the acoustical solutions that Acoustima® offers is colorful, multi-shaped and safety 3D acoustic panels that absorb or proof the sound inside and outside the room. As well as Seatup Turkey® also offers lecture hall’s seats which is acoustically tested. These seats are made from a high-quality fabric which has acoustic properties. Also, Acoustima® achieves that the gymnisium treated acoustically by installing wooden acoustic panels which controlling heat and sound in the space.
In addition; Acoustima® produced acoustical solutions for Auditorium in the mean of installing acoustic panels on the walls, using acoustical suspending cieling, add acoustical carpets or the most important acoustical solution for schools and for Auditorium escpetaily the Seatup Turkey® also produced are seating solutions. Seatup Turkey® offers a special series for the Auditorium seat with acoustical properties,which you can check it from the online cataloge: https://www.seatupturkey.net/wp- content/uploads/2018/09/Seatup_Turkey_Kat_Auditorium-Conference- Hall.pdf Finally, if you acheive this factors there will be many benefits for both students and teachers just like: Greater understanding of speech, Lower stress levels and blood pressure, Better reading ability and test results for students and Less voice problems for teachers. if you are intersting in providing a comfotable enviroment helps in the ideal effictive education without any noise, you just have to call us:
